Wholesale Vorsk VMP-1 GBB SMG with 2 Mags & Suppressor – Bulk Supplier

The VORSK VMP-1 is a lightweight, full-polymer Gas-Blow-Back, Airsoft
Sub-Machine-Gun that is at home on the skirmish field as it is in the
CQB arena. VORSK is on a mission to deliver Gas-Blow-Back excellence to
the Airsoft Field. Building upon their vast selection of Gas-Blow-Back
sidearms, the VMP-1 is their first foray into the world of
Sub-Machine-Guns. Announced at IWA 2023 and delivered to stores in the
summer, the VMP has attracted a lot of attention due to its compact
lightweight design, user-friendly features, and of course, excellent GBB
performance.

Ergonomic, Compact & Lightweight

Constructed
of a durable, lightweight polymer, the VMP-1 makes for an excellent
primary in CQB environments. With the buttstock buried into your
shoulder and your hands positioned towards the front of the replica,
you’ll enjoy a wide yet controlled “sweep” angle, perfect for
transitioning around obstacles and room clearances. Those corner
transitions are improved further by the 15-degree tilt mechanism
installed inside the buttstock. This spring-centered tilt enables you to
angle your body around a corner whilst holding the VMP-1 straight,
reducing the chance of side-sweeping BBs caused by the hop curve not
being parallel with the ground. The stock itself is foldable along the
right-hand side of the VMP-1, simply lift the lock mechanism and rotate
it into position “Akimbo, anyone”. The pistol grip features molded
stippling for a secure hold. Green fiber sights are neatly tucked within
the 20mm Picatinny flattop accessory rail. Although difficult to get
your eyeline behind when used with the buttstock, the bright fiber
sights allow for speedy, instinctive parallax sighting for fast target
acquisition. The foldable stock is built into an M4 Stock Tube receiver
slot allowing you to refit your VMP-1 with an M4 stock of your choice

The Perfect Secondary

Built
for the CQB Arena, but certainly capable of competing on the Airsoft
Field. The VMP-1 when collapsed is only 345mm in length. With the
ability to replace the rear shock with an M4 QD Sling Point and
aftermarket holsters on the way, the VMP-1 is a worthy candidate as an
explosive secondary for any Sniper/ DMR setups. But it needn’t be a
secondary when out in the wilderness of your nearest skirmish field. the
VMP-1 is able to hit targets accurately with a predictable flight path
at +30m and an exceptionally high ROF (Rate of Fire), and it’ll
certainly get you out of a pinch when called upon.

48-Round Full-Auto Gas-Blow-Back Fun

The
VMP-1 is a select-fire Airsoft Sub-Machine-Gun. The fire controls are
all in easy reach with the bolt release, magazine release, and fire
selector all a finger or thumb away from your standard “on-trigger”.
position. Fire safety is controlled by a trigger safety requiring you to
intentionally pull on the full trigger before allowing the VMP to fire
similar to an airsoft Glock. Powered by gas, any premium airsoft gas such as the RWA Green Gas is
suitable. You can expect to get at least two (potentially three)
magazines worth of rounds per every gas refill. Additional magazines are
available separately, remember to purchase your color-matched magazine
(available soon) covers to complete the look. To adjust the hop unit,
the VMP-1 is supplied with a tool key to adjust the hop wheel just
inside the dust cover similar to the KWA MP9 / TP9 System 7 gas airsoft submachine guns.

Walk the Walk, Talk the Talk

Airsoft
is all about immersing yourself in that day’s objective, and it helps
when your tool for the day “walks & talks” how you’d expect to.
VMP-1 owners will enjoy all of the gunplay and transitions associated
with GBB replicas. With the magazine load’s “slide-click”, the bolt’s
“slide-click-slam” and of course the sound of 48 rounds being unloaded
downrange on full-auto, the VMP-1 will bring a smile to any airsofter to
get their hands on it. Constructed of a durable polymer, the VMP-1 is
fitted with metal accessories where required – the reinforced charging
handle, 6.03mm Tight bore inner barrel, Flash Hider, Stock Hinge, and
Dual-Location side rails.

Built for Accessories

An
“undressed’ VMP-1 will not be how they’re seen in their natural
environment – the Airsoft Arena. With a full-length 20mm Flat-Top
accessory Rail, Under-Barrel Rail, Dual-Location 7-slot Side Rails, M4
compatible Stock Tube, and of course the optional “Can” suppressor, the
VMP-1 is crying out for additional aftermarket accessories. Recommended
aftermarket accessories would include Foregrips, Lasers / Torches, and
perhaps Holosun Optics.
Barrel Attachments are limited when the provided Flash Hider is fitted
as this has been designed specifically for the “oversized” suppressor
supplied with the “X” variant (also available separately). Should you
wish to fit your own Flash Hiders, Suppressors, or Tracer Units, simply
remove the Flash Hider via its grubscrews and replace it with any 14mm
CCW airsoft barrel attachment.

Check out more Airsoft Guns

Magazine Compatibility:

• Vorsk VMP-1 Gas Airsoft Magazines
• KWA MP9 / TP9 System 7 Series Gas Airsoft Magazines

Includes:

• x1 Vorsk VMP-1 GBB SMG (Grey)
• x2 48 Round Vorsk VMP-1 Gas Airsoft Magazine
• x1 Set of Spare O-Rings
• x1 Mock Suppressor
• x1 Manual
• x1 Vorsk VMP-1 PVC Patch

Bolt & Stock Maintenance Video for the Vorsk VMP-1: